Add yourself to our mailing list!

Product Categories
Craft Shows
Designer Frames
Papertole Classes
3D Cards Step-By-Step
3D Cards or Mini Papertole
Papertole Books
Frame and Mattboards
Papertole Accessories
Papertole Prints
Matt Frames
Students Gallery
Stickers
Scrap Matts
Clearance Lines

Online Currency Converter

Current Category
Matt Frames > Asembly Instructions

	Step 1 – Each packet contains a base matt and two matts with windows, all are acid free.
	Step 2 – Place small amounts of Tacky Glue on the back of the top matt ( the one with the larger opening) and glue it to the middle matt.
	Step 3 – Place the glued matts onto the base board, do not glue them to base board, this will help you position your project, then glue your project in place.
	Step 4 – Take off the top matts and turn over. Place strips of double sided tape all around window opening. Cut a piece of window plastic to the size shown, not all the way to the edge.
	Step 5 – Cut foam strips to size and glue down with small amounts of Tacky Glue, as shown. Repeat till all four sides are completed. Use craft knife to cut strips.
	Step 6 – Leave to dry for at least 15 minutes.
	Step 7 – Place small amounts of Tacky Glue all around on the foam strips and glue down onto base matt with project.
	Step 8 – To finish your project, use double sided tape and stick ribbon to foam.